20' x 20' West Coast Frame Party Tent Top - Blue and White
Out of stock
These replacement 20' x 20' West Coast Frame Party Tent Tops are designed to replace your old, worn out and damaged party tent tops. Our West Coast Frame Tent Tops are constructed from our finest 16oz commercial-grade blockout PVC vinyl and are meant to withstand the rigors of constant set up and tear down that can happen over the course of a busy rental season. With proper care and maintenance, these durable tent tops are going to have the kind of longevity that puts other available options on the market to shame.
These single-piece vinyl tent tops are made with a material that is resistant to mold, mildew, tears and flame while being 100% waterproof. Additionally, all panels have been bonded with 1 inch heat-sealed overlapping seams to ensure the utmost durability and strength. With heavy duty aluminum reinforcement plates on the inside and outside for support, its no wonder why these tent tops are some of the best available today.
These tent tops have scalloped valances that are bonded with vinyl binding and have sidewall ropes permanently attached, should you ever want to add sidewalls to your tent (sidewalls sold separately).
Please note: This listing is for only the single piece tent top. Complete tent or tent poles are sold separately.
Warranty Information: Our vinyl canopy tents, vinyl tops, and vinyl sidewalls come with a 1-Year Warranty against manufacturer's defects. Warranty does not cover improper installation or misuse. Warranty does not cover wind whip or wind crack damage from the usage of our canopy tents in temperatures below 40 degrees Fahrenheit.
- One-Piece Top
- Our best quality, 16 oz Block-out Vinyl
- 100% Wateproof
- Heavy duty aluminum reinforcement plates on the interior and exterior put our tents ahead of the competition
- Tops are made with mildew resistant, flame retardant material
- Reinforced aluminum plates sewn into top all points for heavy-duty installation
- All panels are bonded with 1" heat sealed overlapped seams
- Scalloped valances bond with vinyl binding
- Guy ropes and jump ropes are spliced in at each pole location
- Side curtain rope line is replaceable if needed
- 2" Vinyl webbing reinforcements to and from all poles
- Detailed installation instructions are sewn into tent top storage bag
Safety: We only sell or distribute tent tops that use a fire resistant vinyl meeting or exceeding the National Fire Protection Association's fire resistant standards.
California Prop 65 Warning: This product can expose you to chemicals including PolyVinyl Chloride (PVC), which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information, click this image or visit www.P65Warnings.ca.gov.
SAFETY PRECAUTIONS: Weather is unpredictable, installer/end-user must incorporate knowledge of local weather conditions in accordance with the installation instruction guidelines.
- Rain water may collect on the tent fabric perimeter causing "ponding" or "water pocketing". Ensure the tent is installed and tensioned correctly. The additional weight from the water can cause the tent to sag, ponding will get worse. This may cause partial or complete collapse and damage to the top/frame components/and poles.
- Wind, Wind/Rain combination can cause rope/ratchet and ground stakes to loosen. This may cause partial or complete collapse and damage to the top/frame components/and poles.
- Lightning: Immediately evacuate the tent until the chance of a lightning strike is no longer present.
- Snow: Tents, canopies, structures, and shelters are not designed to carry any type of snow loading. These products should not be used if snow of any kind is present, and must be evacuated immediately.
- It is very important to do routine maintenance checks on ropes/ratchets and stakes and maintain proper tension on the tent top at all times
|Shipping Method||Parcel (Ground)|
|Compatible Tent Usage||Premium West Coast Frame Tent|
|Tent Frame Type||West Coast Frame, Single Tube|
|Tent Components Included||Tent Top only|
|Tent Top Piece Count||One Piece|
|Color||Striped Blue and White|
|Top Material||16oz PVC Vinyl (580 gram)|
|Custom Printing Available?||Yes|
|Low Temperature Threshold||40 F (4.4 C)|
|Mold and Mildew Resistant||Yes|
|Size||20' x 20'|
COVID 19 Service Interruptions - Due to the COVID 19 Pandemic, we continue to closely monitor our partner delivery network in both parcel, LTL, and other various methods of delivery of products. Unfortunately, we have continued to see delays, shortages, damage, and misplaced shipments nationwide across multiple carriers. We do not provide a Guarantee of shipments to customer locations, nor refunds for the delayed product(s) in shipment. Should your order be time-sensitive please contact a sales representative about priority shipping methods vs standard shipping.