Moose Supply Inflatable Bounce House Vinyl Repair Kit, Blue with 4 oz. SX69 Glue
It's true that bounce houses, water slides, and other inflatable units will require repairs and patching from time to time. So when you're in need of a little maintenance to your bounce house, jumper, moonwalk, water slides or inflatables, you're going to need the right vinyl to patch any holes, tears or other punctures. You're going to want a Pogo Bounce House Repair Kit.
This Pogo Inflatable Bounce House Repair Kit features a 4oz container of SX-69 vinyl cement glue and a commercial grade vinyl strip that is 12 inches wide and 5 feet long, so you can cut to size the piece that you'll need to use to patch tears, punctures, and holes within the vinyl of your bounce house or inflatable units. This vinyl strip is made from 15 oz commercial grade vinyl that is 100% waterproof and tear resistant. The commercial quality, gloss finish vinyl will closely match areas of your bouncer or other inflatable units.
SX-69 Vinyl Cement Glue Adhesive is fast drying (3-5 minutes), waterproof, solvent-synthetic resin adhesive that is used extensively for bonding vinyl coated and vinyl laminated fabrics, urethanes, vinyl foams and films, leather, and metals. What makes SX-69 Vinyl Cement Glue so special is its superior usage for sealing or waterproofing stitched seams, quickly drying within minutes with super-strong bonds that remain flexible. It is not affected by weather and temperature extremes and is highly resistant to oil, fuel, grease, and many chemicals.
Please Note: Exact color match not guaranteed. Shade may vary slightly from photo due to lighting and other factors, but colors have been represented and described as accurately as possible.
- 12" x 60" vinyl strip
- 4oz SX-69 Vinyl Cement Glue
- Super-strong, waterproof bonds
- Fast drying time (3-5 minutes)
- Used for bonding vinyl-coated and vinyl laminated fabrics
- Resistant to weather and temperature extremes
- Long Shelf Life (18 months or longer)
- Temperature Range: -30 F to 180 F
- Comes with applicator brush
For optimum results: SX-69 should be applied by brush, although a roller may be used. Apply one coat to each surface. The application should be made bonding coated surface to coated surface using roller pressure to mate the surfaces. Although the material may be bonded while wet, optimum results are achieved when waiting for 3 to 5 minutes before bonding the surfaces together.
California Prop 65 Warning: This product can expose you to chemicals including PolyVinyl Chloride (PVC), which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information, click this image or visit www.P65Warnings.ca.gov.
|Shipping Method||Parcel (Ground)|
|Mold and Mildew Resistant||No|
COVID 19 Service Interruptions - Due to the COVID 19 Pandemic, we continue to closely monitor our partner delivery network in both parcel, LTL, and other various methods of delivery of products. Unfortunately, we have continued to see delays, shortages, damage, and misplaced shipments nationwide across multiple carriers. We do not provide a Guarantee of shipments to customer locations, nor refunds for the delayed product(s) in shipment. Should your order be time-sensitive please contact a sales representative about priority shipping methods vs standard shipping.